Dishwasher installation costs $400 to $1,700 per job in 2026
Dishwasher installation costs $400 to $1,700 in 2026 with a new unit. HomeGuide lists $600 to $1,700. Fixr lists an average of $1,000. Angi lists an average of $1,200. Labor alone runs about $150 to $500 when you swap one unit for another. New plumbing or wiring can add hundreds of dollars. The type of dishwasher also matters. Ask for the unit price and the labor price on separate lines so you can compare quotes.
What price guides say
We checked 3 price guides and read every number on their pages on October 7, 2026. They do not all measure the same thing, so read each line for what it counts.
| Source | What it found |
|---|---|
| HomeGuide | HomeGuide lists $600 to $1,700 on average with a new unit, $200 to $500 of labor to replace one, and $300 to $1,300 for a new install. |
| Fixr | Fixr lists an average of $1,000, a range of $400 to $1,500, and labor of $150 to $300 in most cases. |
| Angi | Angi lists an average of $1,200, with most jobs from $1,000 to $1,500, and plumbers or electricians at $75 to $150 per hour. |
Dishwasher installation price by type and part of the job
| Type or part | Price | Source |
|---|---|---|
| Replace existing unit, labor only | $200 to $500 | HomeGuide |
| New install, labor only | $300 to $1,300 | HomeGuide |
| Built-in dishwasher | $600 to $1,000 | Angi |
| Portable dishwasher | $400 to $800 | Angi |
| Countertop dishwasher | $350 to $700 | Angi |
| Double drawer dishwasher | $1,300 to $2,200 | Angi |
| New install where none existed | $1,200 to $2,500 | Angi |
| Standard unit, average | $1,000 | Fixr |
Every number in this table was read on one of the source pages listed at the bottom of this page.
What pushes the price up
| What | Why it matters |
|---|---|
| Replace or new install | HomeGuide lists $200 to $500 of labor to replace a unit and $300 to $1,300 for a new install with new connections. |
| Type of dishwasher | Angi lists built-in at $600 to $1,000, portable at $400 to $800, and double drawer at $1,300 to $2,200. |
| Plumbing and wiring | HomeGuide lists a new outlet at $150 to $350 and a new circuit at $250 to $900. These add up quickly. |
| Who does the work | HomeGuide says installers charge $120 to $350 for labor. Angi says plumbers and electricians charge $75 to $150 per hour. |
| Old unit removal and permits | HomeGuide lists removal at $50 to $150 and permits at $25 to $100. Angi lists permits at $50 to $250. |
What the price includes
The price usually covers hooking up the water line, drain, and power, and a test run. The unit itself may be extra. Delivery, haul away of the old dishwasher, a new outlet, a water line kit, and permits often cost more. Ask for each item in writing. It does not include tax or extras the provider adds on the day.
DIY or hire a pro
A swap with the same hookups can be a weekend job for a careful DIYer. Angi lists DIY tools and materials at $100 to $300. A pro often costs $150 to $500 in labor, so the savings may be small. Hire a pro if you need new plumbing, a new outlet, or a new circuit. A leak behind a cabinet or a bad wire can cost far more than the labor you saved. Turn off the water and the power before you start, and ask the store whether DIY install voids the warranty.
How to tell you need it
You need an install when you buy a new dishwasher, replace an old one, or add one where none stood before. Signs the old one is done include standing water, bad smells that do not go away, a door that will not latch, or dishes that stay dirty. If the unit leaks or trips a breaker, stop using it and call a pro.
How to judge your quote
- Does the quote split the unit price and the labor price?
- Does it say if old unit haul away and delivery are included?
- Does it list any plumbing, outlet, or circuit work?
- Does it say who pulls the permit if one is needed?
- Compare the total with the range above: $400 to $1,700 per job for most people in 2026.
Ways to pay less
- Replace the old unit with a similar size. HomeGuide lists labor at $200 to $500 when connections already exist.
- Ask the store about install deals. Retail installers charge $120 to $350 per HomeGuide, and some stores include free delivery, says Fixr.
- Skip the new circuit if you can. HomeGuide lists $250 to $900 for one, so check that your outlet works first.
- Haul the old unit away yourself. HomeGuide lists removal at $50 to $150 and Fixr lists $100 to $250.
- Get two or three quotes. Angi lists labor at $75 to $150 per hour, so hourly rates differ by pro.
Why this costs more in 2026
Trade labor now runs about $75 to $150 an hour in most of the US. Lumber, steel, copper, PVC and concrete all cost more than in 2024, and freight went up after the oil shock that began with the Iran war in February 2026. Dishwasher installation costs more in 2026 because plumbing and electrical labor and the price of the units have risen.
How we got these numbers
The range on this page comes from HomeGuide, Fixr and Angi. We opened each source page and read every number on it on October 7, 2026. Where the sources disagree, the table above shows each one so you can see the spread. These are planning ranges, not quotes. The written price you are given is the real price.
Common questions
How much does dishwasher installation cost?
With a new unit it costs $400 to $1,700. Fixr lists an average of $1,000 and Angi lists $1,200.
How much is labor alone?
HomeGuide lists $200 to $500 to replace a unit. Fixr lists $150 to $300 in most cases.
What if I need new plumbing or wiring?
HomeGuide lists a new outlet at $150 to $350, a new circuit at $250 to $900, and basic plumbing at $150 to $250.
Does the old dishwasher removal cost extra?
Often. HomeGuide lists $50 to $150. Fixr lists $100 to $250. Angi lists $20 to $100.
Do I need a permit?
It depends on your city and on the work. HomeGuide lists permits at $25 to $100. Angi lists $50 to $250.