Water damage restoration in Dallas costs about $3,800 in 2026
Water damage restoration in Dallas costs about $3,800 for a typical job in 2026.
What moves the price
- The water category. Clean water from a broken supply pipe is the cheapest to deal with. Gray water from a washing machine or a dishwasher costs more. Black water from a sewer line or an outside flood costs the most, because everything it touched gets thrown out.
- The class, which means how far the water spread. HomeGuide puts class 1 at $150 to $500, class 2 at $1,500 to $5,000, class 3 at $5,000 to $15,000 and class 4 at $15,000 to $100,000. LawnStarter uses lower class numbers, which is why we show both.
- Square feet and how wet they are. HomeGuide prices extraction at $4 to $6 a square foot for clean water, $6 to $9 for gray water and $9 to $12 for black water. LawnStarter puts the whole job at $3.15 to $7.40 a square foot.
- How long the water sat. Mold can start in 24 to 48 hours. Once it starts, HomeGuide puts mold work at $15 to $30 a square foot, or $1,500 to $15,000 for the job, plus $300 to $650 for the inspection.
- Local labor. The Dallas labor index is 0.92 and a laborer here is $21.05 an hour (BLS, May 2025). Two crews doing the exact same job in two cities can be hundreds of dollars apart for this reason alone.
- Drying days. Fans and dehumidifiers are rented by the day, and the crew comes back each day to read the moisture meters. A job that takes five days to dry costs more than the same job that takes two.
- What actually broke. HomeGuide puts a burst pipe repair at $150 to $250 a linear foot and a sump pump at $600 to $2,500. That bill sits on top of the drying work, not inside it.
- The February 2021 deep freeze burst pipes across Dallas and Fort Worth, and the weak spot has not changed. Many homes run water lines through an unheated attic, so one hard freeze means water falling from the ceiling. LawnStarter lists a Dallas average of $4,300 with a typical range of $1,560 to $7,540.
What is included
A standard water damage job in Dallas runs in five steps, and a real quote shows all five.
Step 1, the call out and the inspection. The crew finds the source, stops it if they can, and classifies the water. They use a moisture meter and often a thermal camera to find wet material inside walls and under floors. Most companies fold this into the job price when you hire them, and charge a call out fee if you do not.
Step 2, extraction. Standing water comes out with a truck mounted or portable extractor. This is the part priced by the square foot: $4 to $6 for clean water, $6 to $9 for gray and $9 to $12 for black water (HomeGuide).
Step 3, drying. Air movers and dehumidifiers run for three to five days in a normal job. The crew returns daily to read moisture levels and move gear. Wet drywall, carpet pad and insulation are cut out, because they do not dry well. Drywall replacement runs $1.50 to $3 a square foot (LawnStarter).
Step 4, cleaning and treating. Surfaces get washed and an antimicrobial goes on anything that was wet, so mold does not start. If mold has already started, that becomes its own line at $15 to $30 a square foot (HomeGuide).
Step 5, repairs. New drywall, paint, flooring and trim. Many restoration companies quote the cleanup and the rebuild together. Ask for them split, because you can shop the rebuild and you cannot really shop an emergency.
What the two big guides say. HomeGuide puts a typical job at $2,000 to $6,000, with the full span running $150 to $100,000. LawnStarter puts the national average at $3,250 with a typical range of $1,270 to $5,376, a low end of $430 and a high end of $20,400. The guides do not agree, and that is normal, because they count the rebuild differently. Our Dallas number sits inside both ranges once local labor is applied.
Insurance, in plain words. A sudden and accidental event is normally covered, so a pipe that bursts today is a claim. Slow damage that built up over months is normally not covered, because the insurer calls that a maintenance problem. Rising water from outside the house is flood, and flood is never covered by a normal home policy. You need a separate flood policy for that. Take photos and video before anyone moves anything, keep every receipt, and get the restoration company to write down the water category and class, because the insurer will ask for it.
Why this costs more in 2026
Restoration costs more in 2026 for the same reasons every trade does. Crew labor runs $100 to $250 an hour. Freight and anything made from oil went up after the oil shock that started with the Iran war in February 2026, and antimicrobial chemicals, plastic sheeting, foam and sealers are all oil products. Steel, copper, aluminum and resin are up, so the rebuild that follows the cleanup costs more than it did two years ago. For water work there is one extra squeeze: drying gear is rented by the day and power costs more, so a long drying job carries more cost than the same job used to. Local pay matters too. A laborer in the Dallas-Fort Worth-Arlington, TX area now earns $21.05 an hour (BLS, May 2025).
Ways to pay less
- Call inside 24 hours. Clean water turns into gray water as bacteria grow, and the price per square foot jumps with it.
- Photograph and video everything before a single thing moves. No photos means a smaller insurance payout, every time.
- Ask for the price per square foot and the daily equipment rate in writing before the gear comes off the truck.
- Ask the crew to split the quote into drying and rebuild. Drying is urgent, the rebuild is not, and you can get two more quotes on the rebuild.
- For a small clean water spill in one room, you may not need a crew at all. LawnStarter puts a class 1 job at $140 to $400 if you dry it yourself with rented gear.
- Check whether your policy pays the company direct. If it does, do not pay the invoice yourself and wait to be paid back.
- Ask if the company is IICRC certified and get the certificate number. Insurers push back on invoices from crews with no certification.
What price guides say
We checked 3 price guides and read every number on their pages. They do not all measure the same thing, so the ranges on this page come from putting them side by side.
- HomeGuide: Water damage restoration cost, written February 6, 2026
- LawnStarter: How Much Does Water Damage Restoration Cost in 2026
- BLS: Occupational Employment and Wage Statistics, metro files, May 2025
Common questions
How much does this cost in 2026?
Water damage restoration in Dallas costs about $3,800 for a typical job in 2026. Most people pay about $3,800 per job. The low end is $1,400 and the high end is $14,000.
What changes the price the most?
The biggest factors are: The water category. Clean water from a broken supply pipe is the cheapest to deal with. Gray water from a washing machine or a dishwasher costs more. Black water from a sewer line or an outside flood costs the most, because everything it touched gets thrown out; The class, which means how far the water spread. HomeGuide puts class 1 at $150 to $500, class 2 at $1,500 to $5,000, class 3 at $5,000 to $15,000 and class 4 at $15,000 to $100,000. LawnStarter uses lower class numbers, which is why we show both; Square feet and how wet they are. HomeGuide prices extraction at $4 to $6 a square foot for clean water, $6 to $9 for gray water and $9 to $12 for black water. LawnStarter puts the whole job at $3.15 to $7.40 a square foot.
How can I pay less?
Call inside 24 hours. Clean water turns into gray water as bacteria grow, and the price per square foot jumps with it. Photograph and video everything before a single thing moves. No photos means a smaller insurance payout, every time. Ask for the price per square foot and the daily equipment rate in writing before the gear comes off the truck.
Where do these numbers come from?
From 3 named price guides: HomeGuide, LawnStarter, BLS. Each one is linked on this page with the date we read it.