Well pump replacement costs $974 to $2,821 per replacement in 2026
Well pump replacement costs $974 to $2,821 in 2026. The pump type moves the price most. Angi and HomeAdvisor both list an average of $1,897. HomeGuide lists $1,800 on average and $1,000 to $2,500 for a submersible pump installed. Labor adds $250 to $1,000 at Angi and HomeAdvisor. A new tank, a switch, or permits can add more, so ask for every part in writing.
What price guides say
We checked 3 price guides and read every number on their pages on October 7, 2026. They do not all measure the same thing, so read each line for what it counts.
| Source | What it found |
|---|---|
| HomeGuide | HomeGuide lists a $1,800 national average, $1,000 to $2,500 for a submersible pump installed, and $400 to $1,000 for a shallow jet pump. |
| Angi | Angi lists a $1,897 average with a range of $974 to $2,821, plus $250 to $1,000 for install labor. |
| HomeAdvisor | HomeAdvisor lists a $1,897 average, a normal range of $974 to $2,821, labor of $250 to $1,000, and permits of $50 to $200. |
Well pump costs by type and part
| Item | Cost | Source |
|---|---|---|
| Normal range for a replacement (average $1,897) | $974 to $2,821 | Angi |
| Submersible pump, installed | $1,000 to $2,500 | HomeGuide |
| Shallow well jet pump, installed | $400 to $1,000 | HomeGuide |
| Deep well jet pump | $800 to $2,200 | Angi |
| Pressure tank | $500 to $1,000 | HomeGuide |
| Install labor | $250 to $1,000 | HomeAdvisor |
| Permits | $50 to $200 | HomeAdvisor |
| Well pump contractor, per hour | $45 to $150 | Angi |
Every number in this table was read on one of the source pages listed at the bottom of this page.
What pushes the price up
| What | Why it matters |
|---|---|
| Pump type | A shallow jet pump costs less than a submersible. HomeGuide lists $400 to $1,000 for a shallow jet and $1,000 to $2,500 for a submersible. |
| Well depth | A deep well needs a stronger pump. Angi lists deep well jet pumps at $800 to $2,200 and shallow jet pumps at $450 to $1,500. |
| Labor | Install labor runs $250 to $1,000 at Angi and HomeAdvisor. A pro charges $45 to $150 per hour, so a hard job costs more. |
| Tank and parts | HomeGuide lists a pressure tank at $500 to $1,000 and a switch at $25 to $100. HomeAdvisor lists tank replacement at $800 to $3,800. |
| Permits and extras | HomeAdvisor lists permits at $50 to $200. Angi adds $250 to $1,000 for pipework and electrical labor on top of its $974 to $2,821 range. |
What the price includes
The price usually covers the new pump and the work to install it and connect it to your system. Pipework, electrical work, a new pressure tank, a switch, and permits can cost extra. Angi lists $250 to $1,000 for pipework and electrical labor, and HomeAdvisor lists permits at $50 to $200. It does not include tax or extras the provider adds on the day.
DIY or hire a pro
A well pump touches water pipes and live electric wire, so most owners hire a pro. Angi lists well pump contractors at $45 to $150 per hour and electricians at $50 to $100 per hour. A deep submersible pump sits down in the well, which is hard to pull without the right tools. DIY can save the labor of $250 to $1,000 listed by Angi and HomeAdvisor, but a wrong fit or bad wiring can cost more. Check your local rules, since HomeAdvisor lists permits at $50 to $200.
How to tell you need it
Signs include no water, weak water pressure, a pump that runs all the time, or faucets that sputter. A pump that clicks on and off often can point to the tank or the switch instead. A pro can test the pump, switch, and tank before you pay for a new pump. Fix it fast, since you may have no running water until it is done.
How to judge your quote
- Does the quote name the pump type, brand, and size?
- Does it list labor, pipework, and electrical work apart?
- Does it say if a new pressure tank or switch is needed?
- Does it include permits and a warranty on the pump and the work?
- Compare the total with the range above: $974 to $2,821 per replacement for most people in 2026.
Ways to pay less
- Have a pro check the whole system first. A bad switch costs $25 to $100 at HomeGuide, so know which part failed before you buy a new pump.
- Get two or three written quotes. Angi lists pro rates of $45 to $150 per hour, so labor quotes can differ a lot between companies.
- Pick the pump type your well needs. A shallow jet pump costs $400 to $1,000 at HomeGuide, but it only suits a shallow well, so do not overbuy.
- Replace a worn pressure tank at the same visit. HomeGuide lists tanks at $500 to $1,000, and one trip means one set of labor charges.
- Ask what the quote includes. Pipework, electrical work, and permits are often separate, and HomeAdvisor lists permits at $50 to $200.
Why this costs more in 2026
Trade labor now runs about $75 to $150 an hour in most of the US. Lumber, steel, copper, PVC and concrete all cost more than in 2024, and freight went up after the oil shock that began with the Iran war in February 2026. Labor adds to the bill in 2026, since Angi and HomeAdvisor both list install labor at $250 to $1,000 on top of the pump itself.
How we got these numbers
The range on this page comes from HomeGuide, Angi and HomeAdvisor. We opened each source page and read every number on it on October 7, 2026. Where the sources disagree, the table above shows each one so you can see the spread. These are planning ranges, not quotes. The written price you are given is the real price.
Common questions
How much does it cost to replace a well pump?
Angi and HomeAdvisor list $974 to $2,821, with an average of $1,897. HomeGuide lists an average of $1,800.
How much is a submersible well pump?
HomeGuide lists $1,000 to $2,500 installed. Angi lists $1,000 to $2,500 or more for the pump.
How much is labor for a well pump?
Angi and HomeAdvisor list $250 to $1,000 for install labor. Pros charge $45 to $150 per hour.
Do I need a new pressure tank too?
Not always. HomeGuide lists a pressure tank at $500 to $1,000. HomeAdvisor lists tank replacement at $800 to $3,800.
Can a well pump cost a lot more?
Yes. HomeAdvisor lists a full range of $200 to $5,800, and HomeGuide lists a top price of $20,000. Windmill pumps start at $5,000 at both Angi and HomeAdvisor.