A purge valve replacement costs $176 to $369 in 2026

Purge valve replacement cost by car

RepairPal lists these ranges for the most common cars. Your year and engine move the price inside each range.

How common cars compare

Against the middle of the RepairPal national average, $230, the Toyota Camry runs about 55 percent more; the Nissan Altima runs about 40 percent more; the Honda CR-V runs about 6 percent less; the Ford F-150 is about the national middle; the Honda Civic runs about 9 percent less; the Honda Accord runs about 12 percent less; the Toyota Corolla runs about 16 percent less; the Chevrolet Silverado 1500 runs about 17 percent less. The gap comes from where the part sits, how long it takes to reach, and the price of the part for that car.

What price guides say

We checked 4 price guides. They do not all measure the same thing, so read each line for what it counts.

What pushes the quote up

How to tell you need it

• The check engine light is on with an EVAP code, such as P0441 or P0455.
• The car is hard to start right after you fill the gas tank, or it idles rough.
• A shop runs an EVAP smoke test and checks if the valve opens and closes as it should.

What the price includes

The price covers the new purge valve, labor to swap it, clearing the code, and a test drive. A smoke test or hose repair may be extra. It does not include tax, shop supply fees, or other repairs the shop finds while the car is in.

How to judge your quote

1. Ask if the shop checked the gas cap and the vapor hoses first.
2. Ask what test showed the valve is bad, such as a smoke test or a scan tool check.
3. Ask if the quote includes new clips and hoses if they break.
4. Ask if the shop will clear the code and run the car to confirm it stays off.
5. Compare the total with the range above: $176 to $369 for most cars.

Ways to pay less

• Tighten or replace the gas cap first. It costs very little and causes the same light.
• Choose a quality aftermarket valve instead of one from the car maker.
• Ask if the shop will skip a second diagnosis fee if you do the repair there.
• Check if the part is easy to reach. Some people swap it with basic tools.

Dealer or independent shop

RepairPal puts labor for a purge valve replacement at $65 to $95. At the typical independent shop rate of about $140 an hour, that is under 1 hour of work. A dealer charging $200 an hour would bill about $114 for the same labor, and a $100 an hour shop about $57. Parts cost about the same anywhere, so the shop rate is where you can save. See what mechanics charge an hour.

Why this costs more in 2026

Shop labor now runs about $100 to $250 an hour. Many car parts are imported, and freight costs went up after the oil shock that began with the Iran war in February 2026. Steel, copper, aluminum and resin prices are up too, and they go into almost every part. Purge valves contain a small coil and electronics inside a plastic body, and prices have risen with the cost of copper and control parts.

How we got these numbers

The national range, the labor and parts split and the prices by car come from RepairPal's purge valve replacement estimate, last updated September 3, 2026. We checked them against Kelley Blue Book, J.D. Power and YourMechanic, and read every number on the source page on October 7, 2026. These are planning ranges, not quotes. Your shop's written estimate is the real price.

Common questions

Related repair costs