A strut bearing replacement costs $307 to $662 in 2026
A strut bearing replacement costs $307 to $662 in 2026 for common cars, per RepairPal. Its national average is $398 to $552. Labor is about $330 to $484 and parts are about $68. Jalopnik says strut mounts cost $30 to $80 each in parts and a replacement can run $300 to $700. YourMechanic lists front strut mount replacement at $511 to $730, such as $524 for a 2008 Toyota Camry.
Strut bearing replacement cost by car
RepairPal lists these ranges for the most common cars. Your year and engine move the price inside each range.
| Car | Price, parts and labor |
|---|---|
| Toyota Corolla | $477 to $662 |
| Nissan Altima | $441 to $622 |
| Honda Civic | $414 to $587 |
| Toyota Camry | $416 to $560 |
| Honda CR-V | $367 to $528 |
| Honda Accord | $356 to $513 |
| Ford Explorer | $322 to $437 |
| Ford Escape | $307 to $420 |
How common cars compare
Against the middle of the RepairPal national average, $475, the Toyota Corolla runs about 20 percent more; the Nissan Altima runs about 12 percent more; the Honda Civic runs about 5 percent more; the Toyota Camry is about the national middle; the Honda CR-V runs about 6 percent less; the Honda Accord runs about 9 percent less; the Ford Explorer runs about 20 percent less; the Ford Escape runs about 23 percent less. The gap comes from where the part sits, how long it takes to reach, and the price of the part for that car.
What price guides say
We checked 3 price guides. They do not all measure the same thing, so read each line for what it counts.
| Source | What it found |
|---|---|
| RepairPal | National average $398 to $552. Labor is about $330 to $484 and parts are about $68. |
| Jalopnik | Jalopnik says strut mounts cost $30 to $80 each in parts and a replacement can run $300 to $700. |
| YourMechanic | YourMechanic lists front strut mount replacement at $511 to $730, such as $524 for a 2008 Toyota Camry. |
What pushes the quote up
| What | Why it matters |
|---|---|
| Part cost | The bearing is a low cost part. Most of the bill is labor. |
| Strut disassembly | The strut must come out and be taken apart with a spring compressor. This takes time and care. |
| Done with struts | If the struts are replaced too, the labor overlaps and the bearing adds little extra. Alone, it costs more. |
| One side or both | Shops usually suggest replacing in pairs so both sides feel the same. |
| Alignment | Taking the strut apart changes wheel angles. An alignment can add $100 to $200. |
How to tell you need it
- A creak, pop, or clunk when you turn the wheel at low speed or go over bumps.
- The steering feels stiff or notchy, or the wheel does not return to center well.
- A shop confirms it by turning the wheel with the car on the ground and listening, and by checking the top of the strut for play.
What the price includes
The price usually covers the new bearing, the labor to remove and take apart the strut, and the reassembly. An alignment is often extra. It does not include tax, shop supply fees, or other repairs the shop finds while the car is in.
How to judge your quote
- Ask if the quote is for the bearing only, or the whole strut mount.
- Ask if one or both sides are in the price.
- Ask if an alignment is included.
- Ask if you should replace the struts at the same time to save labor.
- Compare the total with the range above: $307 to $662 for most cars.
Ways to pay less
- If your struts are old, replace the bearing at the same visit. You pay labor only once.
- Ask for a quality aftermarket mount or bearing. It costs less than a dealer part.
- Skip extras you do not need. Only replace the bearing if it is truly worn.
- Get quotes from two shops. Labor rates vary a lot for this job.
Dealer or independent shop
RepairPal puts labor for a strut bearing replacement at $330 to $484. At the typical independent shop rate of about $140 an hour, that is about 2.9 hours of work. A dealer charging $200 an hour would bill about $581 for the same labor, and a $100 an hour shop about $291. Parts cost about the same anywhere, so the shop rate is where you can save. See what mechanics charge an hour.
Why this costs more in 2026
Shop labor now runs about $100 to $250 an hour. Many car parts are imported, and freight costs went up after the oil shock that began with the Iran war in February 2026. Steel, copper, aluminum and resin prices are up too, and they go into almost every part. A strut bearing is a steel bearing with a rubber and metal mount, so steel and rubber part costs push the price up.
How we got these numbers
The national range, the labor and parts split and the prices by car come from RepairPal's strut bearing replacement estimate, last updated September 3, 2026. We checked them against Jalopnik and YourMechanic, and read every number on the source page on October 7, 2026. These are planning ranges, not quotes. Your shop's written estimate is the real price.
Common questions
How much does a strut bearing replacement cost?
RepairPal shows $398 to $552. Jalopnik says a strut mount job can run $300 to $700. Cost depends on the car.
Can I drive with a bad strut bearing?
For a short time. It can cause noise and stiff steering. Get it checked soon.
How long does it take?
Most shops need two to three hours per side. It is faster if the struts are done too.
Can I do it myself?
It is hard. You need a spring compressor to take the strut apart, which can be unsafe. Most people choose a shop.